How To Make A Window Screen With A Kit

Download Commodity

Download Commodity

Window screens are indispensable in the summertime for letting fresh air in your home while however keeping those nasty bugs out. Whether your window screen is broken or you don't have one at all, making 1 is not a big investment—all yous need are a few materials and some tools!

1. one

   Summate the opening of the window you are screening. Measure the height and width of your open up window frame. Most aluminum and vinyl frames accept a aqueduct for the screen to fit into, so exist certain to measure all the way to the insides of this channel. Decrease ¹⁄_four inch (0.64 cm)—equally well every bit an additional an boosted 1.5 inches (3.eight cm) for corner connections—from each dimension to determine the summit and width of your new frame.^[one]

   • Older windows with wooden frames may be trickier, and the corners won't ever exist square. If possible, use the original screen to obtain dimensions for your new one. Otherwise, use your best judgement.

2. 2

   Buy aluminum window frame stock pieces. Habitation hardware stores sell window screen kits with precut pieces of aluminum likewise equally individual pieces. Most private pieces are available in 72 inch (180 cm) and 94 inch (240 cm) lengths. Standard aluminum frame pieces are ^two⁄_eight inch (0.64 cm) in width and ²⁵⁄₃₂ inch (ii.0 cm) thick, which will work for near windows. Focus on purchasing enough aluminum for your frame'due south dimensions.^[2]

   • Take notation of the spline groove on the screen frame—the width should be marked on the packaging. When you purchase your spline, it needs to lucifer the width of the spline groove.
   • If you lot're re-screening a window and the screen frame is still in adept shape, you tin use that instead of purchasing new framing. Just make sure to keep the blackness spine that goes around the old screen, since that is what holds the screen in place.^[3]

   Ad

3. iii

   Purchase a hacksaw with the advisable teeth per inch (TPI). Measure the width of your aluminum pieces. If their thickness is between ¹⁄₈ to ^one⁄₂ inch (0.32 to 1.27 cm), the TPI should 14 to 18 TPI. For thickness between ³⁄₃₂ to ⁵⁄_sixteen inch (0.24 to 0.79 cm), the TPI should be 24. Finally, for anything less than ¹⁄_eight inch (0.32 cm), the TPI should be 31.

   • Purchase hacksaws from home hardware stores or online suppliers. Check the TPI on the product label or manual.

4. iv

   Saw the aluminum frame pieces to length with a hacksaw. Mark the cutlines on each bar using a permanent marker. Attach your aluminum pieces into a vice grip for maximum stability. Grip both handles of the hack saw and make big, long strokes abroad from yous along the cutline. Brand sure the blade teeth are pointing forwards and y'all're using as much of the blade equally possible with each stroke.^[4]

   • If you don't accept a vice grip, place each bar onto a clean, apartment surface. With the edge to be cut hanging from the surface, have a friend agree the other end firmly equally yous carefully saw the bar.
   • E'er exercise caution and cut abroad from you and anyone helping you.

5. v

   Use a metal file to remove any rough edges. Sawing aluminum can leave some rough cuts. Obtain a second-cut file with a medium degree of coarseness and rasp-cut teeth. Concord the aluminum firmly confronting a clean, flat surface with your not-dominant paw. Now, use your dominant hand to employ pressure from the file toward the crude aluminum surface and move the file in forrard strokes abroad from y'all. In one case the file reaches the end of the aluminum, lift it upwards and bring it back toward you.^[five]

   • Never file in dorsum and forth motions.
   • Whenever possible, secure your aluminum in a vice grip to keep it stable.

6. 6

   Connect the upper and lower window corners with 4 corner inserts. Push the frame pieces into the openings of the "50-shaped" plastic or aluminum frame corner inserts. Make sure that the spine tracks in the corners align with the tracks on the frame pieces.^[6]

   • Make sure your corner inserts are 1.v inches (iii.8 cm) long. Purchase them from home hardware stores separately or in window screen packages.

   Advertizement

1. 1

   Buy screen spline with charcoal fiberglass for the all-time results. Spline tin be purchased from habitation hardware stores separately or in window screen packages. Window screen packages will provide you with the advisable spline for the provided aluminum pieces. But if you purchase your spline separately, make sure its width matches the width of your frame's spline groove.^[7]

   • Compare the width listed on the spline packaging to the width of the spline groove listed on its packaging.

2. two

   Place your aluminum framing onto a flat surface and hold it steady. The aluminum framing is soft metallic and very flexible. It can easily be warped and ripped from the screening—agree it firmly against a flat surface and brand sure all of the edges are parallel.^[eight]

3. 3

   Lay the screening cloth straight onto the frame. While belongings the frame firmly against a flat surface, lay your screening down over it.^[9] The screening should be 1 to 3 inches (2.5 to 7.6 cm) more than the aluminum framing on all iv sides.^[10]

   • Take a friend hold the frame steady as you pull the screening over the surface for better results.

4. 4

   Cut the screening textile i inch (2.5 cm) bigger than the frame. Pull the screening tight, first in the length and so in the width. Have intendance not become a warp in the frame or waves in the screening fabric. At present, utilise a standard pair of scissors to cut the screening approximately 1 inch (2.5 cm) larger than the frame.^[11]

   • Don't worry almost cut completely straight—giving yourself enough actress screening material is more than of import.

   Advertizement

1. one

   Press the wire screening material into the frame channel with a spline roller. Feed the spline through the spline roller starting from the back (concave) to the front (convex). Whorl the front spline all the way around the front circular leg. At present, starting in the corner of the frame, push the front circular leg downwards the frame aqueduct, making sure that the back leg follows behind. Go on rolling the spline in to the other end of the frame, keeping both legs straight the whole time.^[12]

   • When using a spline roller, always make sure the legs are aligned with the channel and don't come up loose every bit y'all movement.
   • Press firmly down onto the mount to proceed information technology steady equally you lot drag the spline roller through the frame channel.
   • Pull the screen material tightly abroad from the frame as you lot move the spline roller.

2. two

   Press the prophylactic spline into the frame with the back finish of the spline roller. Remove all of the spline from the roller. Now, with the back (concave) end facing forward, scroll the mouse wheels forth the channels to ensure all of the spline is firmly in place.^[13]

   • Press firmly down on the roller every bit you move along the channels.
   • This will wedge the screening into the frame.^[14]

3. 3

   Cut the unnecessary screening carefully off with a utility knife. Pull on the excess spline away from the frame. Place the utility knife at a 45-degree angle and pull it along the frame outline right to a higher place the spline. Continue this for all 4 sides, taking care to brand fifty-fifty cuts.^[15]

   • Apply a firm amount of pressure down on the knife when making your cuts.

4. iv

   Turn the window screen with the spline facing inside your habitation. Earlier mounting your window screen, position the spline inside your home. In addition, make certain any jump clips confront upward to fit into the top window slot.

   • Be sure the spline is firmly continued to the aluminum frame before installing it in your window opening.

   Advertisement

Add together New Question

• Question

  Can you re-use the screen frame?

  

  Michael Fox is a Window Repair Specialist and the President at Window Repair Systems and WindowHardwareDirect.com, based in Westminster, Southward Carolina. With over 25 years of experience, Michael specializes in commercial window repair and service. He holds a business caste from Monroe Customs College and SUNY Brockport. Michael has helped Window Repair Systems and WindowHardwareDirect.com become an industry leader in commercial window repair and hardware distribution, servicing schools and businesses and training large public schoolhouse systems.

  

  Window Repair Specialist

  Expert Answer

  

  Support wikiHow by unlocking this expert answer.

  Yes, if you're trying to supervene upon a damaged screen, just the screen frame is okay, you lot can but rescreen information technology. Merely be sure to keep the black spine that goes all around the edges—that'southward what keeps the screen mesh in.

• Question

  How do you put new screen on an one-time frame?

  

  Michael Trick is a Window Repair Specialist and the President at Window Repair Systems and WindowHardwareDirect.com, based in Westminster, South Carolina. With over 25 years of experience, Michael specializes in commercial window repair and service. He holds a business caste from Monroe Community College and SUNY Brockport. Michael has helped Window Repair Systems and WindowHardwareDirect.com become an industry leader in commercial window repair and hardware distribution, servicing schools and businesses and training large public schoolhouse systems.

  

  Window Repair Specialist

  Expert Answer

  

  Back up wikiHow by unlocking this expert answer.

  Purchase a roll of screen mesh that matches the frame. Curlicue the new mesh over the top of the screen frame, and then have the old screen spline—which looks like a long cord made of rubber or foam—and push button it into the rails of the screen frame. That will wedge the screen into the track.

• Question

  How exercise I install a cross brace?

  

  Accept a length of woods with a thickness that is equal to or less than that of the frame pieces that you have just cut. Now, cut this length equal to the length of the two short frame pieces that yous just cut. Prior to installing the screen, place this length in the middle and between the two long frame pieces. If it moves to and fro, you may spike it in place, temporarily, with any adhesive record. Go on with stretching the screen across and over the assembled frame. The cross brace may either exist left in place or removed after the screen window frame is in place.

• Question

  How practise I proceed the centre of the long side from pulling in when I roll the screen in using the roller?

  

  If it is a large screen, add a cross-brace to the middle of the screen. Too endeavour taping downwardly the frame before attaching the screen with the spline.

Ask a Question

200 characters left

Include your email accost to get a bulletin when this question is answered.

Submit

Advertizement

Video

Things You'll Need

• Kit with frame strips to cut to size
• Screen material (fiberglass)
• Rubber spline (comes in a roll)
• Clips
• Hacksaw
• Tape measure
• Permanent mark
• Metal file
• Utility knife
• Ruler
• Spline roller

• If the frame is intact just the spline has come loose, you may be able to only roll the spline dorsum into place rather than make an entirely new window screen.

• You may be able to detect prefabricated frames that are screwed together. The lower and upper frame piece are assembled with 4 screws and a crosspiece is attached with 1 screw on each end. Usually, this is done with long hex screws and nuts.

Advertizement

About This Commodity

Article Summary 10

To brand a window screen, start by measuring the height and width of the window frame y'all'll be putting the screen in. And so, purchase a window screen kit at your local hardware shop that has enough material for your window's measurements. Adjacent, apply a hacksaw to cut the aluminum pieces that came with the kit to size before assembling them with the iv provided corner inserts. Once you've finished the frame of your window screen, cut some screening material so it's 1 inch bigger than the frame. Finally, use a spline roller to printing the screen and some safe spline into the back of the frame. To learn how to install a homemade window screen, curlicue down!

Did this summary help you?

Thanks to all authors for creating a page that has been read 431,321 times.

Did this article help you?

Source: https://www.wikihow.com/Make-a-Window-Screen

Posted by: hensonkettere.blogspot.com

Share this post